What matters need to pay attention to when installing the capsule accumulator?

Prior to the installation of the capsule accumulator, the following checks are required:

1. Whether the components of the capsule accumulator are complete and whether there is any damage;

2. Whether the capsule accumulator meets the usage specifications;

3. Whether the valve cover of the valve part becomes tight and whether the inlet of pressure oil is blocked.When installing the sealed water storage device, the installation position and the last wide place should be selected first, so as to facilitate the inspection and maintenance at ordinary times.

In order to ensure the safe use of the water storage device, the hydraulic accumulator factory should support it well on the basis of bracket and foundation, and do not adopt the method of tilt or transverse installation.There are several points for attention.

When the capsule accumulator is used to buffer and absorb the pulse, it should be installed near the vibration source as far as possible.

In order to prevent the reverse flow of the pressure oil stored in the accumulator, a one-way valve should be set between the oil pump and the accumulator.

It is also important to note that no welding, rivets or machining on the capsule accumulator will reduce the life of the product.Finally, after installing the packaged accumulator, it is necessary to conduct another inspection and test run to establish relevant records.Without the above problems, it is possible to use an accumulator to recover energy for energy recovery. Cixi hydraulic accumulator factory is a field that has a lot of research.

Energy recovery can improve energy efficiency, pneumatic hydraulic accumulator plant is an important way to save energy.Since the accumulator can temporarily store energy, it can recover multiple functions and locations of energy.