A system for maintaining a constant pressure on a capsule accumulator product.

The accumulator product must continue to perform the necessary operations in the event of a pump failure or power failure required by a particular system (if the feed element is suddenly interrupted).For example, the piston rod of a hydraulic cylinder must be retracted into the cylinder for safety reasons.In this case, an accumulator of appropriate capacity is required as an emergency power source.Cixi capsule accumulator wholesale in systems where constant pressure is maintained without the actuator working for long periods of time, an accumulator can be used to compensate for leakage in order to maintain constant pressure.

Due to the quick rotation of the switching valve, the hydraulic pump suddenly stopped, the movement of the actuator suddenly stopped, and then the artificial need for parts of emergency braking and other reasons, the flow of liquid in the pipeline changes rapidly, the impact pressure (oil shock) system has a safety valve, but the temporary surge of pressure and impact is inevitable.Such impact pressure usually causes failure or damage to gauges, components, and seals in the system, or damage to piping, and may include.

The system may produce significant vibrations.If the accumulator is installed before the impact source of the control valve or hydraulic cylinder, such impact can be absorbed and mitigated.Ninghai capsule accumulator wholesale diaphragm accumulator expansion, good nitrogen.Slowly, when high-pressure nitrogen allows the rapid expansion of the balloon, the polymer is immediately cooled to brittle failure of the balloon.To happen.The rapidly expanding air bag is also pushed by the conical valve below the oil end, and the air bag is compressed.

If the pressure is too high or lower, the accumulator operation will be affected and damaged.The result: elicitation number?Conical valve damaged due to prefilling of accumulator.The basic reason of ninghai capsule accumulator wholesale air bag is as follows: the bag has malfunction.There is no low or preheated airbag collector.The rate of change.The air bag system's pressure folds at the top of the shell as a result of damage to the air bag's air valve.A flat tire.In this case, only one cycle damages Ann