How Do Accumulator Manufacturers Identify Manual Valve Types?

Accumulator manufacturers can use various transmission methods for valve control, including manual, electric, hydraulic, pneumatic, worm gear, electromagnetic, electromagnetic-hydraulic, electric-hydraulic, pneumatic-hydraulic, spur gear, bevel gear, and more. They can handle water, steam, oil, gas, slurry, various corrosive media, liquid metals, and radioactive fluids. The working pressure ranges from 0.0013 MPa to 1000 MPa for ultra-high pressure, and the temperature range is from -269°C to 1430°C for ultra-high temperature. Stainless steel bladder accumulator wholesale According to different functions and uses,

Shut-off valve: Also known as a block valve, its function is to connect or cut off the medium in the pipeline. Types include gate valve, isolation valve, plug valve, ball valve, butterfly valve, diaphragm valve, etc.

Check valve: Also known as a non-return valve, its function is to prevent backflow of the medium in the pipeline. The foot valve at the pump suction also belongs to the check valve category.

Zhejiang bladder accumulator company Safety valve: The function of the safety valve is to prevent the pressure of the medium in the pipeline or device from exceeding the specified value, thereby achieving safety protection.

Regulating valve: Types include regulating valve, throttle valve, and reducing valve. Their functions include regulating medium pressure, flow rate, and other parameters.

Diversion valve: Includes various distribution valves and steam traps. Its function is to distribute, separate, or mix the medium in the pipeline.

Vent valve: An indispensable auxiliary component in pipeline systems, widely used in boilers, air conditioning, petroleum, natural gas, and drainage systems. Often installed at high points or reverse bends to remove excess gas from the pipeline, improving efficiency and reducing energy consumption.